- GST NO. : 27AAPFS6936G1ZM
| No Item Found... |
Single Ph Openwell & Sub Starters
Leading Manufacturers, Exporters, Wholesaler and Retailer of (Snr/owidmc/wlc/as) 1Ph Openwell Submersible Pump Starter, MCB Type Submersible Pump Starter Panel, Snr /mk/bch. 2Ph. Submersible Pump Starter, SNR/EP/2007/DMC Submersible Pump Starter, SNR/EP2007 Submersible Pump Starter, Snr/MCB/DG Submersible Pump Starter and SNR/MK/BCH/DG/AS-3 & 5 Submersible Pump Starter from Sangli.
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Submersible Pump Starter |
| Technology | Microcontroller Based |
| Suitable For | Openwell Submersible Pumps |
| Available For Pump Range | 0.5 To 2 H.P. |
| Display | Digital Ammeter & Voltage Indication |
| Special Features | After Dryrun Restart Timer (Settable),Dryrun Overload Protection (Settable),2 Tank WLC Facility,Auto/Manual Facility |
(SNR/OW/DMC)
(SNR/OW/DMC/WLC/AS)
Features
-
Microcontroller based technology
-
Suitable for Openwell Sub. Pumps
-
Available for 0.5 to 2 H.P. Pumps
-
Digital Ammeter & Voltage indication
-
After Dryrun Restart Timer (Settable)
-
Dryrun overload % settable
-
2 Tank WLC Facility (In WLC/AS)
-
Auto/Manual Facility
Technical Specifications
-
Operating Voltage: 160 V to 270 VAC
-
Overload Trip Time – 2S to 30S
-
Dry Run Trip Time – 7S
-
Dry run setting – 80% of full load (settable)
-
Overload setting – 130% of full load
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | India |
| Size | Multisizes |
| Model | SNR/MCB |
| Type | Starter Panel |
| Application | Submersible Pumps |
| Suitable Pump Capacity | 0.5 To 2 H.P. |
| Protection | MCB Overload |
| Additional Features | Separate Analog Meters For Voltage & Current |
(SNR/MCB)
Features
-
Suitable for Submersible Pumps
-
Available for 0.5 to 2 H.P. Pumps
-
MCB Overload Protection
-
Separate analog meters for voltage & current
| Business Type | Manufacturer, Exporter, Supplier |
| Technology | Micro Controller Based |
| Suitable For | 2 Phase Submersible Pumps Up To 7.5 HP |
| Auto Start | Yes, With Capacitor Cut Facility |
| Overload Trip Time | IDMT |
| Dryrun Trip Time | 10 Seconds |
| Voltage Options | High And Low Voltage Optional |
(SNR/MK/BCH/AS-2 PH)
Features
-
Micro Controller Based Technology
-
Suitable for 2Ph. upto 7.5 HP Sub. Pumps
-
Voltage & current shows & fault shows on LED Display
-
Auto Start cap. cut facility
-
Overload trip time IDMT
-
Dryrun trip time 10 Sec.
-
High Voltage & Low Voltage Optional
-
25 A- 4 Pole contactor used to isolate both phase
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Submersible Pump Starter |
| Country of Origin | India |
| Phase | Single |
| Frequency | 50 Hz |
| Application | Industrial, Control Panel For Single-phase Submersible Pumps |
| Features | Micro Controller Based Technology,Suitable For 1 Ph. Submersible Pumps,Available For 0.5 H.P. To 2 H.P. Sub Pumps,LED Display For Each Protection & Facility,Auto Set As Per Motor Current,Voltage & Current Shows Continuously On LED Display,O/L & D/R % Sett |
| Power Source | Electric |
1 PH. SUB CONTROL PANEL (DMC) FULL AUTOMATIC\\n
Features:
- Micro Controller Based Technology
- Suitable for 1 Ph. Submersible Pumps.
- Available for 0.5 H.P. to 2 H.P. Sub Pumps
- LED display for each protection & facility
- Auto set as per motor current (as per HP)
- Voltage & current shows continuously on LED display one by one
- O/L & D/R % Settable
- After D/R Restart Settable (1 min. to 180 min.)
- Water level Controller facility available for upper tank in auto start model.
- (SNR/EP/2007/DMC/A) – On & Off time settable (Cyclic)
- SNR/EP/2007/DMC – Off time settable (1 min. to 255 min.)
- Auto Start after power came back (auto delay timer)
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Submersible Pump Starter |
| Country of Origin | India |
| Phase | Single |
| Application | Industrial, Suitable For Submersible Pumps |
| Features | Microcontroller Based Technology,No Volt Release (Auto OFF On Failure Of Supply),Protection From O/L & Dryrun,Separate Indicators & Voltmeter / Ammeter,Automatic Push Button O/L And N/L Setting,Motor Starts Automatic After Supply Is ON In Auto Start Model |
| Technical Specifications | 100/120, 120/150MFD,25/36/50 MFD,80% Of Full Load (settable),130% Of Full Load |
| Power Source | Electric |
1 PH. SUBMERSIBLE STARTER\\n
(SNR/EP2007, SNR/EP2007 A)
Features
- Microcontroller-based technology.
- Suitable for Submersible Pumps.
- Available for 0.5 to 2 H.P. Pumps
- No Volt Release.
- (Auto OFF on failure of supply)
- Protection from O/L & Dryrun.
- Separate indicators & Voltmeter / Ammeter
- Automatic push button O/L and N/L setting
- Motor Starts Automatic after supply is ON in Auto start model.
Technical Specifications
- Start Capacitor: 100/120, 120/150MFD.
- Run Capacitor: 25/36/50 MFD.
- Dry run setting: 80% of full load (settable)
- Overload setting: 130% of full load
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Submersible Pump Starter |
| Country of Origin | India |
| Application | Industrial, Suitable For Submersible Pumps,0.5 To 2 H.P. Pumps |
| Material | Mild Steel |
| Color | Grey |
| Rated Power | Electric |
| Features | MCB Overload Protection, Digital Voltage & Current Display |
| Condition | New |
1 PH. SUBMERSIBLE MCB STARTER\\n
(SNR/MCB/DG)
Features
- Suitable for Submersible Pumps
- Available for 0.5 to 2 H.P. Pumps
- MCB Overload Protection
- Digital Voltage & Current Display
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Submersible Pump Starter |
| Country of Origin | India |
| Application | Industrial, Suitable For 3 HP To 5 HP 1Ph. Submersible Pumps |
| Power Source | Electrical |
| Material | MS With Powder Coated Cabinet |
| Color | Gray |
| Features | Micro Controller Based Technology,LED Display For Each Protection & Facility,Voltage & Current Shows Continuously On LED Display,Standard Make Capacitor For As Per HP,Used 40 A Contactor Or Power Relay 63 A For Switching Operation,ISI Fireproof Cable Wiri |
| Additional Info | Heavy Duty Submersible Pump Starter With Advanced Features And Customizable Settings. |
SNR/MK/BCH/DG/AS-3 & 5 H.P.
Features:
- Micro Controller Based Technology.
- Suitable for newly launched 3 HP to 5 HP 1Ph. Sub. Pumps
- LED display for each protection & facility.
- Voltage & current shows continuously on LED display one by one.
- Standard make capacitor for as per HP
- Used 40 A contactor or power relay 63 A for switching operation.
- ISI fireproof cable wiring for panel.
- Heavy MS with powder coated cabinet.
- Autostart with on delay timer & also WLC facility available on request.
- O/L. & D/R protection for pumps.
- O/L. & D/R % settable as per requirement.
- Technical setting & any additional change can be done as per requirement.
